Skip to main content
No results found...
Dry Herb Vaporizers
Posted 2 months ago
Hi I was wondering if anyone knows how to fully clean the Adventurer in particular the bit where the bubbler connects to the heating chamber(I would assume there is a pipe or something to connect the bubbler to the oven/heating chamber). Cheers Sam
Liked by Erik W and 1 other
The Adventurer is not the easiest to clean vaporiser and that particular part, where the bubbler connects to the vapor path is very challenging to clean.
It is possible to pull it apart but because of the limited space in there, it is a lot more difficult to put it back together.
Here is a close up image of the actual part you are wondering about how to clean -
If you'd like to give it a go, you can push the plastic part out, you may need a knife or a small screw driver to dig it out from the side.
Once this is out, you should be able to see two very small screws on the bottom. You need a small but long Philips head screw driver to undo those screws. Before you get them out, make sure you can put them back as there is can be tricky.
Once you undo the screws, you should be able to get the connection part out and give it a clean.
I hope this helps and sorry I don't have an easier way to do this.
Let us know if you have any more questions.
The adventurer is hard to clean properly, not a whole lot of thought was put into cleaning when they designed it. Good luck with it and let us know if you find an easier way.